Single Chip FM Radio Circuit

Home > Circuits > Sound/Radio > Single Chip FM Radio

Search:

Author	Views	Views Today	Rank	Comments
	176,101	6		1

Schematic

Parts

Part Total Qty. Description Substitutions C1, C9, C12, C17 4 0.1uF Ceramic Disc Capacitor C2, C4, C5, C6, C13 5 0.01uF Ceramic Disc Capacitor C3 1 20pF Ceramic Disc Capacitor See Notes C7, C15, C16 3 0.001uF Ceramic Disc Capacitor C8, C10, C11 3 220pF Ceramic Disc Capacitor C14 1 100pF Ceramic Disc Capacitor C18 1 200pF Ceramic Disc Capacitor R1 1 22K 1/4W 5% Resistor R2 1 100K 1/4W 5% Resistor R3 1 100K Linear Taper Pot D1 1 Motorola MV209 Varicap VHF Tuning Diode U1 1 TDA7000 FM Radio IC See Notes L1 1 7 Turn Inductor (See Notes) MISC 1 Board, Wire, Socket For U1, Case

Notes

1. Unfortunately, the TDA7000 went obsolete a few years ago. The original version is made by Signetics (now Philips) and is getting a bit hard to find these days. There are, however, other options. Philips makes the TDA7010T which is a surface mount version. The TDA7021T is also available which includes stereo capability. They are electrically similar but are only 16 pin chips so you'll need to compare the datasheets to build the circuit.
2. The value of C3 is noncritical and can be between 10pF and 20pF. Minor adjustments to L1 may be required based on the value of C3.
3. L1 is made by winding 7 turns of 24 AWG wire around pencil. Remove the pencil and then space the turns slightly.
4. Frequency selection is via R3.

If you would like to leave a comment, you can do so using the form below. Comments can be things like suggestions, successes or failures, improvements, similar circuits, error reports, an answer to a previous commenter's question, or anything in between. However if you would like to ask a question it is suggested that you use the forum instead. The forum provides a more robust environment for discussion.

Important: If you post a technical question here, there is no guarantee it will be answered. All technical questions should be posted to the forum. The owner of this site generally does not answer questions in comments.

All comments are subject to approval before they are displayed here, so your comment will not appear immediately. This is done mainly to prevent spam and other abuse. If you wish to remain anonymous, simply enter "anonymous" for your name and/or email.

Name:
Email:
Subject:
Comments:
Anti Spam Code:	Please enter the exact text shown in the image above into the box below. Browser cookies must be enabled to comment on circuits.
Privacy Policy

Back To Circuits Page | Mail Me | Search |