|
BEatonNo1
Nobel Prize Winner
USA
1133 Posts |
 Posted - Feb 06 2004 : 11:30:27 AM
|
I dont think I follow what your planning. you have a sealed tank of oil and you taking some of the pressure from the turbo and your bleeding it into the tank to get your oil pressure so that the oil will flow through the berrings. this will only occur if there is a pressure difference between the oil in the tank and output from the berrings. so you will still need to pump it back into the original container. so why not just use the pump to move the oil instead? also when you shut off the engine it still needs to have oil flowing through the berrings to cool them and keep them from being damaged while they come to a stop.
|
 |
|
Turbo to thrust turbine
