| T O P I C R E V I E W |
| n/a |
Posted - May 16 2004 : 6:34:12 PM
Does anyone know how to build an electric
arc ?
Mike
|
| 5 L A T E S T R E P L I E S (Newest First) |
| Aaron Cake |
Posted - May 21 2004 : 11:16:51 AM
quote:
Hey Aaron,
What is the voltage rating on the clip leads and wire in the pic?
The jumper leads were probably rated under 50V, but I was only holding a ground, so I was not worried. The output of the flyback is around 30KV, and the output of the multiplier must be around 70KV.
BTW, that homemade arc welder is pretty cool, as is the rest of that site. He totally used the wrong type of battery for the bike light though...
|
| Chamkeeper |
Posted - May 21 2004 : 02:55:44 AM
Hey Aaron,
What is the voltage rating on the clip leads and wire in the pic?
|
| gokartmaniac |
Posted - May 20 2004 : 11:29:40 PM
http://www.dansworkshop.com/Homebuilt%20arc%20welder.shtml
this should give you a hint
www.freewebs.com/sethmeredith |
| Aaron Cake |
Posted - May 19 2004 : 09:16:21 AM
http://www.aaroncake.net/circuits/hvgen.htm
|
| cirvin |
Posted - May 17 2004 : 4:27:17 PM
A device to create an electric arc?
Any 10+kv power supply will do the trick.
http://daxter12.topcities.com |
