| T O P I C R E V I E W |
| n/a |
Posted - Sep 15 2003 : 10:14:05 PM
I have just gotten my Turbo'd N/a running ^_^ (thnx for the almost complete guide aaron!) I was hoping those who have already done the mod could share some SAFC settings that might work (or a general area) for the time being before I go get it dyno tuned. Thanks!
|
| 10 L A T E S T R E P L I E S (Newest First) |
| hondakiller |
Posted - Jan 07 2004 : 6:46:16 PM
quote:
Yes, those settings will be fine. The S-AFC on the S4 is always a little weird. If you want, you can connect the full range TPS from the S5 so you have finer control.
or you could use the boost sensor instead of the TPS
|
| n/a |
Posted - Sep 29 2003 : 7:53:29 PM
hopefully I can get a better camera and take some real pictures ^_^
|
| Aaron Cake |
Posted - Sep 18 2003 : 09:49:36 AM
Yes, those settings will be fine. The S-AFC on the S4 is always a little weird. If you want, you can connect the full range TPS from the S5 so you have finer control.
|
| n/a |
Posted - Sep 17 2003 : 7:49:51 PM
also I have a s4 so the throttle for hi is set at 99% and low is 97%, would i still be able to use -30 to -25 all the way through on the low map?
Edited by - Z3r0 on Sep 17 2003 7:50:22 PM |
| n/a |
Posted - Sep 17 2003 : 7:47:56 PM
not yet, bu thopefully soon.. but hopefully soon... its not as nice as yours htough, I dunno how to weld so I had to make due with coupling and some marine rad hose which was flexible.
|
| Aaron Cake |
Posted - Sep 17 2003 : 11:11:19 AM
Any pictures and stuff on your project?
|
| n/a |
Posted - Sep 17 2003 : 10:05:33 AM
ok sounds good ^_^ thanks so much!
|
| Aaron Cake |
Posted - Sep 17 2003 : 09:23:31 AM
Well, I was able to go -30% at idle, slowly tapering up to 0% at 3500RPM, then increasing 5% for every 1000 RPM. This was very rich, but fairly safe. If you have a dyno and a wideband, you can tune it properly. I am speaking of the high-throttle map. For the low throttle map, you'll be negatives all the way, probably -30 to -25.
|
| n/a |
Posted - Sep 16 2003 : 4:37:04 PM
Ok, well I have a walbro 255 fuel pump with stock TII injectors on primary and seconary.
|
| Aaron Cake |
Posted - Sep 16 2003 : 07:29:11 AM
Depends on your fuel setup. Need more information to make some guesses.
|
