| T O P I C R E V I E W |
| n/a |
Posted - Jul 20 2004 : 10:11:24 AM
I would like to use ATD converters for the following application: The ATD is plugged inside a computer. The input to the ATD is a set of 5V lamps. The status of the lamps (ON/ OFF) is to be captured into a database on periodic intervals. The database contains fields like lamp ID, The Status of the respective Lamp and the Timestamp.
Tan anyone help me to design this circuit please?
[size=5]
|
| 4 L A T E S T R E P L I E S (Newest First) |
| Chamkeeper |
Posted - Jul 25 2004 : 12:30:46 AM
EVERYTHING you need to detect on/off using a paralell port is on this site, in great detail.
|
| YS |
Posted - Jul 23 2004 : 7:25:37 PM
light-sensitive device can make TTL output. Still no need for ADC unless it is your school requirement. Use printer port.
|
| n/a |
Posted - Jul 23 2004 : 03:11:26 AM
quote:
Why and A/D converter? If you are only detecting on/off condition then the there is no need. Depending on how many lights you want to monitor, a simple vb program connected to the paralell port might do everything you need.
Thanks for your reply. But I want to extend this ON/OFF reading from switch to a Light Sensitive device. So would like to use ATD. Please help me to do this.
Btw: Could you please let me know how to read the ON/OFF status using VB/ C language using Parallel Port.
Thanks in advance.
|
| Chamkeeper |
Posted - Jul 20 2004 : 9:00:50 PM
Why and A/D converter? If you are only detecting on/off condition then the there is no need. Depending on how many lights you want to monitor, a simple vb program connected to the paralell port might do everything you need.
|
