This gun is pretty fun but very inefficient due to the fact that it costs practically nothing to make.
MATERIALS: 1 Soda bottle 1 Straw Some tape
TOOLS A drill or an ice pick Scissors
INSTRUCTIONS Take the cap off of the bottle and put a hole in it with the ice pick or drill a small hole in it. Now don't worry if the straw wont fit, just cut the sides of it at the tip and force it in. Tape up the area around the soda cap joint and the straw so now pressure will escape there. Now poke a hole in your bottom (this makes it inefficient, but cheap and I can't think of a better way to make it without buying something and I'm too lazy to go to the store.) and now you can either spray the hairspray in there or unscrew the lid and spray it in there. Make a tiny little spud slug with the straw, pack it in and light it through the hole in the bottom.
well i had to to try 6 time before i had one model that worked.
also it took me two people to shoot the thing one to put the fuel in and one to lightthat was the first time but after that i could do it by myself but didn'thave much success
oh yea i melted the top to the straw, to make it more air tight
Easy to make, cheap, fun, tiny gun to make
Posted - May 25 2001 : 9:47:23 PM
