Aaron's Homepage Forum
Aaron's Homepage Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Electronics
 Power Supply
 good things are here

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File (GIF, JPG, JPEG, BMP, ZIP, PNG)

   

T O P I C    R E V I E W
mhandsome Posted - Apr 23 2015 : 05:03:13 AM
I was wondering about this schematic. Just a mental exercise, you know. What caught my attention is the fact that both tantalum caps showed in - as I think - reversed polarity.
Look at the schematics: the base of the transistor never gets more than 1V above emitter voltage - when the transistor is opened; when the transistor is closed, the base voltage may go well below 0.
The other side of the cap is con
3   L A T E S T    R E P L I E S    (Newest First)
audioguru Posted - May 28 2015 : 07:54:38 AM
quote:
Originally posted by yytbyebyet

the transistor never gets more than 1V above emitter voltage - when the transistor is opened

Of course it does. The collector of each transistor swings to +24V when the transistor turns off.

quote:
when the transistor is closed, the base voltage may go well below

Why do you talk about "open and closed" instead of turned on or turned off? Is it turned off when it is "open" and is it turned on when it is "closed"?

When the base voltage is +0.7V or a little higher then the transistor turns on. The transformer causes charged coupling capacitor to try to cause the base voltage of the other transistor to go negative to -23V but the emitter-base has avalanche breakdown at about -7V or -8V which damages the transistor and capacitor. The horrible circuit should have diodes added in series with the bases and pull-down resistors to fix that like this:


Download Attachment: bad inverter corrected.PNG
6.96 KB

yytbyebyet Posted - May 19 2015 : 07:52:53 AM
the transistor never gets more than 1V above emitter voltage - when the transistor is opened; when the transistor is closed, the base voltage may go well below
audioguru Posted - May 07 2015 : 10:31:53 PM
Are you talking about the extremely simple 12VDC to 120VAC inverter? Yes, its capacitors had backwards polarity but their polarity has been fixed.

The collector side of each capacitor goes positive and to 0V. The base side of each capacitor goes positive about 1V and goes negative enough to cause avalanche breakdown.
The circuit works very poorly with low power.

Doors open and close, not transistors. Transistors turn on and turn off.

Aaron's Homepage Forum © 1995-2020 AARONCAKE.NET Go To Top Of Page
This page was generated in 0.06 seconds. Snitz Forums 2000