| T O P I C R E V I E W |
| mauldee |
Posted - Sep 29 2012 : 5:18:43 PM
Hi there, I am endeavoring to assemble the 40w fluoro inverter I understand the basics of the circuit and feel capable in assembling it, I just can't get my head around the winding of the secondary coils of the transformer, particularly the direction of the winding from layer to layer. Any help would be greatly appreciated. |
| 8 L A T E S T R E P L I E S (Newest First) |
| rahul12 |
Posted - Dec 29 2012 : 12:08:29 AM
i like this topic and these posts......... |
| mauldee |
Posted - Oct 01 2012 : 4:23:07 PM
Thanks Pebe, you're a winner. |
| pebe |
Posted - Oct 01 2012 : 03:09:31 AM
Wind just like you said, ie. Left to right, then right to left, then left to right - all layers in the same (clockwise) direction. |
| mauldee |
Posted - Oct 01 2012 : 01:20:12 AM
I appreciate your patience Juan, those are the primary and feedback coils, it is the winding of the three layers of secondary coil that I need help with. How do I configure the end of one layer and the start of the next. For example, if winding clockwise from left to right, once I reach the end and insulate the coil do I just wind clockwise from right to left the next layer of the secondary or ... ? Thank you
|
| JUAN DELA CRUZ |
Posted - Oct 01 2012 : 12:07:25 AM
quote:
Originally posted by mauldee
Thanks Juan. My problem is this,I know very little about winding transformers and I require a little guidance on the layering of the secondary coils. How do I configure the end of one layer and the start of the next. For example, if winding clockwise from left to right, once I reach the end and insulate the coil do I just wind clockwise from right to left the next layer of the secondary or ... ? Any help with this would be greatly appreciated.
Hello... as far as I know you must wind the primary and the secondary winding the same direction.
Please take a look at this:
|
| mauldee |
Posted - Sep 30 2012 : 4:00:07 PM
Thanks Juan. My problem is this,I know very little about winding transformers and I require a little guidance on the layering of the secondary coils. How do I configure the end of one layer and the start of the next. For example, if winding clockwise from left to right, once I reach the end and insulate the coil do I just wind clockwise from right to left the next layer of the secondary or ... ? Any help with this would be greatly appreciated. |
| JUAN DELA CRUZ |
Posted - Sep 30 2012 : 11:14:43 AM
Hello. . .
I found this site related to your project. Try to visit the link, it will help you a lot. http://www.talkingelectronics.com/projects/FluorescentInverter/Living12v.html
Clickhere for more details regarding the custom-built transformer: www.talkingelectronics.com/projects/FluorescentInverter/FluorescentInverter.html
I hope it helps you a lot. :-)
|
| Aaron Cake |
Posted - Sep 30 2012 : 10:20:13 AM
Is there a specific part of the instructions you are having trouble with? There is a little diagram that explains it however there is one slight difference between the notes and the schematic in that "Feedback" in the notes is "L1" in the schematic. |
