Aaron's Homepage Forum
Aaron's Homepage Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Mazda RX-7s
 Turbocharged NA
 Paintball hose?

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File (GIF, JPG, JPEG, BMP, ZIP, PNG)
   

T O P I C    R E V I E W
rx7dude822 Posted - Sep 11 2008 : 08:36:25 AM
Hey Aaron,

Can you use paintball hose as an oil feed and or oil drain?

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=JuqsVTo9Zg-s93L0KEFs_TD0GNnzXfkh4VE=?ProductID=Zw.sFAY750wAAAD4C67krFs5#

They seem like a much cheaper alternative, unless the diameter of the hose is too small? Its made to handle high pressure and liquid CO2, so I wouldnt think that oil would be a problem?
1   L A T E S T    R E P L I E S    (Newest First)
Aaron Cake Posted - Sep 14 2008 : 10:24:11 AM
While it might be able to handle the pressure, it probably won't handle the temperature. Oil temps range from 0 to about 250 degrees. Under normal operation you can expect to see between 190 and 220 degrees.

Certainly won't work for an oil drain becasue it's WAY too small. Oil drain needs to be about 1/2".

For the oil drain most hoses rated to handle the heat and oil will work fine.

For the feed, use -4 braided stainlesss, or 1/4" hard tubing.

Aaron's Homepage Forum © 1995-2020 AARONCAKE.NET Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000