| T O P I C R E V I E W |
| wasssup1990 |
Posted - Mar 26 2005 : 9:37:37 PM
Hi!,
I need some help on finding a company that supplies cheap, high quality enclosures. I need a case (enclosure) to put the guts of my equalizer in, but the thing is they all cost way too much for my piggy bank. If you can help, then yr da best.
Thanks.
J.C. |
| 6 L A T E S T R E P L I E S (Newest First) |
| yo_tyler |
Posted - Apr 07 2005 : 01:38:02 AM
www.pactecenclosures.com 5they have free samples you can use!
"I reject to reality and substitute my own" -Adam Savage |
| cirvin |
Posted - Apr 02 2005 : 12:53:07 PM
GMP, thats an excellent site! I'll have to try that sometime.
http://daxter12.topcities.com <Its updated as of 12/9/04, check out the Punk Phone! |
| wasssup1990 |
Posted - Apr 02 2005 : 04:40:59 AM
Thanks GMP for replying. Thanks for giving me these ideas. I don't have the room for any large equipment to alter shapes of metal etc. but you all have some great ideas. In this case I needed a nice high quality case that was cheap. I have found a case now.
Yeehaa!
Yahoo I like Kelly Clarksons song "Since U Been Gone"!
Thanks all!
See ya mate!
J.C. |
| GMP |
Posted - Apr 02 2005 : 02:05:51 AM
I saw an article on the geofex website about making enclosures from metal wall studs. Sounds strange but looked pretty good.
Link is: http://www.geofex.com/Article_Folders/steelstud/steelstud.htm
-George |
| wasssup1990 |
Posted - Mar 29 2005 : 01:29:39 AM
Thanks for the assistance Aaron. 
Since I am a regular vistor of this site I would just like everyone, especialy Aaron to know that I don't create new posts asking questions that I can easily find answers to on Google or somewhere else. I always try to find the answer before posting on this site.
Great site Aaron.  Yes I read the forum titled "Hello Everybody" on this site.
J.C.
Edited by - wasssup1990 on Mar 29 2005 01:31:53 AM |
| Aaron Cake |
Posted - Mar 28 2005 : 09:28:50 AM
If you have access to a sheet metal brake, then you can make your own. The sloped face common to things like this is very easy to create. Most roofers have such a brake, as well as metal shops, etc.
I haven't seen any high quality and cheap cases. I do have a catalogue of probably thousands of enclosures, but they are all very high quality and thus not cheap.
Have you checked MECI?
http://www.meci.com
|
